Gyproc® Spec Sure รับประกันระบบ

รับประกันระบบ

Gyproc® Spec Sure

Mettre en œuvre des produits Placo® 
marqués SystèmePlaco®, c’est :

  • L’utilisation de produits de qualité : respect des normes produits (Européennes et NF)
  • Le respect des règles de l’art : conformité au DTU
  • L’atteinte des performances : performances techniques des ouvrages (mécanique, acoustique, feu) validées par des rapports d’essais et mise à disposition des documents techniques (PV, Avis Techniques, FDE&S).

J'ai compris

ระบบฝ้าฉาบเรียบ "ยิปรอค"

Gyproc® Concealed Ceiling System
Read more
Read less

Key facts

 

  • มีความยืดหยุ่นในการออกแบบได้หลากหลายตามความต้องการ  
    สามารถรวมการตรวจสอบการบริการและจุดเชื่อมต่อได้อย่างง่ายดายระหว่างการออกแบบหรือการติดตั้ง
    สามารถทาสีอะครีลิคสูตรน้ำ และสีที่ระบายอากาศได้บนแผ่นยิปรอค
    ง่ายในการตกแต่งพื้นผิวให้เรียบ และไร้รอยต่อ
    มีประสิทธิภาพในการกั้นเสียงได้ในระดับหนึ่ง เสียงไม่เข้าถึงห้องข้างบน 

 

Description

  • ระบบฝ้าเพดานฉาบเรียบ   "ยิปรอค" ระบบฝ้าเพดานฉาบเรียบ ใช้เพื่อปิดพื้นผิวใต้ท้องพื้น ให้ดูสวยงามเรียบเนียน ไร้รอยต่อ ทําให้ได้ผืนฝ้าเพดาน เป็นเนื้อเดียวกัน สามารถใช้แผ่นยิปซัมได้หลากหลายชนิด ขึ้นอยู่กับพื้นที่และฟังก์ชั่นการใช้งาน

  • ข้อดีของแผ่นยิปรอค (ดูรายละเอียดเพิ่มเติม)

    • แผ่นยิปรอค  มีความแข็งแรง เหนียว แน่น ไม่แอ่นตัว
    • ความเรียบเนียนของผิวแผ่น ฉาบเก็บรอยต่อได้เนียน จนมองไม่เห็นรอยต่อ
    • หัวสกรูไม่หลุด ไม่จม เมื่อยิงสกรู
    • ขอบแผ่นยิปรอค เรียบ เนื้อแผ่นง่ายต่อการตัดแผ่น ติดตั้งง่าย ฉาบง่าย ช่วยให้ทำงานได้รวดเร็วขึ้น
    • แผ่นยิปรอค น้ำหนักเบากว่า ช่วยให้ขนย้ายสะดวก ไม่เปลืองแรง
    • แผ่นยิปรอค มีคุณสมบัติพิเศษที่หลากหลาย มีให้เลือกในทุกลักษณะในการใช้งาน เช่น แผ่นกันร้อน แผ่นเก็บเสียง แผ่นทนชื้น แผ่นทนไฟ แผ่นแข็งแรงเป็นพิเศษ ฯลฯ
    • ช่วยให้มีความปลอดภัยต่อสุขภาพ และช่วยรักษาสิ่งแวดล้อม ผ่านมาตรฐาน ASTM D5116-06 มาตรฐานที่กำหนด และรับประกันเรื่องการปล่อยสารประกอบอินทรีย์ระเหยVolatile organic compounds (VOCs) และสารฟอร์มาลดีไฮด์ หรือแอมโมเนีย ในปริมาณที่ปล่อยออกมาต่ำ มีส่วนช่วยรักษาสภาพแวดล้อมภายในบ้านให้ผู้อยู่อาศัย มีสุขภาพดี ปราศจากมลภาวะ
ขั้นตอนการติดตั้ง

(1)Determine the height of the ceiling then fix the wall angle on the wall. Mark and install the suspension hook for the main runner at the appropriate space.

(2) Cut the main runner flat and fold the end and fix it to the wall vertically above the wall angle level.

(3) Cut the main runner and hook it to the hanging point by the rod and rod-joiner.

(4) Install the cross runner at the determined spacing below the main runner level.

(5) Connect the main runner and the cross runner with the connection clip.

(6) Adjust the level of the ceiling by sliding the rod into the rod-joiner.

(7) Fix the Gypsum Board onto the cross runner with a Drywall screw-in appropriate centers.

(8) Treat all joints with Gyproc® JOINTING tape or it in the wet area, treat all joints with Gypfill™ JOINT HYDRO and taped with Gyproc® Fiber Tape HYDRO. and also the Screw covered.

รายละเอียดแบบ
(1) Typical detail
Section-Concealed ceiling
 

 

Section-Concealed ceiling(1) GypFrame® ML50A

(2) GypFrame® GA1

(3) Gyproc® Gypsum Board

 

(2) Table of choice for metal frame and spacing  

Conceal Spacing

 Hanging rod -Concealed

(1) Gypframe® GA1

(2) Gypframe® ML50A

(3) Gyproc® Wafer Head Screw

(3) Section details

Section-Concealed ceiling

(1) GypFrame®  ML50A

(2) GypFrame® GA1

(3) Gyproc® Gypsum Board

 

(4) Modified angle steel as a hanging rod detail

 Hanging rod -Concealed

(1) GypFrame® GA1

(2) GypFrame®ML50A

(3) Gyproc® Wafer Head Screw

 

(5) Shadow line detail

Shadow line -Conceal

(1) GypFrame® ML50A

(2) Gyproc® Gypsum Board

(3) GypFrame® GA1

(4) Gyproc® Shadow Line

 

(6) Change of level detail

Change of level detail -Conceal

(7) Proserve detail

Proserve detail -Conceal(1) GypFrame® ML50A

(2) Gyproc® Wafer Head Screw

(3) Gyproc® ProServe

 

ขั้นตอนการติดตั้ง

  1. กำหนดความสูงของเพดานและมุมผนังบนกำแพง ทำเครื่องหมายและติดตั้งตัวแขวนตามความเหมาะสม
    
    
  2. ตัดโครงหลักให้ได้ตามความยาวของพื้นที่ โดยพับมุมของทั้ง 2ปลาย ติดตั้งเป็นแนวตั้งของผนังมุมห้อง
  3. ตัดโครงหลัดหลักให้ได้ตามขนาด และเกี่ยวไปที่จุดแขวนตามจุดที่กำหนดตำแหน่งไว้
  4. ติดตั้งโครงรองที่กำหนดระยะห่างไว้ตามโครงคร่าวหลักด้านล่าง  
  5. ล็อคแต่ละจุดตัดของโครงคร่าวหลักและรอง ด้วยตัวล็อค เพื่อความแน่นหนา
  6. ปรับระดับฝ้าเพดานให้ได้ความสูงตามต้องการ โดยการเลื่อนที่ตัวสปริงปรับระดับ
    
  7. ติดตั่งแผ่นยิปซัมตามโครง
  8. ฉาบปิดรอยต่อด้วยปูนฉาบรอยต่อและผ้าเทป พร้อมกันกับฉาบปิดหัวสกรู