Marketing description
-
Gyproc® Smoothing Plaster System is suitable for fixing various defects of the wall surface such as pores, air bubbles, ivory cracks, rough marks from grains of sand, to get perfectly smooth and beautiful before painting or applying wallpaper.
Key facts
-
Area of use: Perfectly smooth wall surface on lightweight brick walls, clay bricks, block bricks, concrete walls Performance :
Skimocat |
Wall Surface Type |
Total Thickness |
Smoothness |
Gyproc® GypCote TOTAL |
Cement, Concrete, Gypsum |
0.5 - 3 mm |
★★★★★ |
Gyproc® ProCote TOP |
Cement,
Precast concrete,
Fiber-Cement, Gypsum |
1- 5 mm | ★★★★ |
Gyproc® Gypwall Finish |
Cement, Concrete, Gypsum |
2 - 3 มม. | ★★★ |
(1)Gyproc® plasters should be mixed by adding clean water and using clean mixing equipment. Contamination from previous mixes must be avoided as this can adversely affect the setting time and strength.
(2) Gyproc Levelline® is fixed to the gypsum board angle by embedding in the finish plaster.
(3) Where there is an increased risk of cracking or where joints exceed 3 mm, the joints are reinforced with Gyproc® Cotton Tape bedded in Gyproc® plaster. In other situations, gypsum board joints can be reinforced with Gyproc® Fiber Tape HYDRO
(4) Gyproc ® plaster is applied with firm pressure, built out to the required thickness in two applications and trowelled to a smooth matt finish
1. Construction details
(1) Brick
(2) Leveling plaster
(3) Smoothing plaster
(4) Paint